![](/images/backgrounds/293017/hp-v1910-users-manual-120219254x1.png)
d.The Global Setup tab
∙Select Enable from the LLDP Enable
∙Click Apply.
Table 62 Configure Switch B
#Enable LLDP on port GigabitEthernet 1/0/1. (Optional. By default, LLDP is enabled on Ethernet ports.)
#Set the LLDP operating mode to Tx on GigabitEthernet 1/0/1.
∙Select Network LLDP from the navigation tree to enter the Port Setup tab, as shown in e. Click the
icon for port GigabitEthernet 1/0/1. The page shown in f is displayed.
e.The Port Setup tab
242