a.The Create tab
2.Configuration items of creating a VLAN interface
Item |
| Description | |
Input a VLAN ID: | Input the ID of the VLAN interface to be created. Before creating a VLAN | ||
interface, make sure that the corresponding VLAN exists. | |||
|
| ||
|
|
| |
| DHCP | Configure the way in which the VLAN interface obtains an IPv4 address. | |
|
| Allow the VLAN interface to automatically obtain an IP address by selecting | |
| BOOTP | ||
|
| the DHCP or BOOTP option, or manually assign the VLAN interface an IP | |
| Manual | ||
Configure | address by selecting the Manual option. | ||
Primary IPv4 |
| Configure an IPv4 address for the VLAN interface. | |
Address | IPv4 Address | ||
This option is available after you select the Manual option. | |||
|
|
Mask Length
Select the subnet mask length.
This option is available after you select the Manual option.
Return to VLAN interface configuration task list.
Modifying a VLAN interface
NOTE:
After you modify the IPv4 address for a selected VLAN interface on the page for modifying VLAN interfaces, click the Apply button to submit the modification.
After you change the IP address of the VLAN interface you are using to log in to the device, you will be disconnected from the device. You can use the changed IP address to
150