a.Network diagram for PoE
| PSE | |
GE1/0/1 | GE1/0/11 | |
|
| AP |
GE1/0/2 |
| |
|
|
Configuration procedure
#Enable PoE on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2, and set their power supply priority to critical.
∙Select PoE PoE from the navigation tree and click the Setup tab to perform the following configurations, as shown in a.
a.Configure the PoE ports supplying power to the IP telephones
∙Click to select ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 from the chassis front panel.
∙Select Enable from the Power State
∙Select Critical from the Power Priority
∙Click Apply.
#Enable PoE on GigabitEthernet 1/0/11 and configure the maximum power of the port to 9000 milliwatts. ∙ Click the Setup tab and perform the following configurations, as shown in b.
463