HP V1910 manual Configuring Radius parameters, Return to Radius configuration task list

Item	Description
	Set the status of the primary server, including:
	∙ active: The server is working normally.
Primary Server Status	∙ blocked: The server is down.
	If the IP address of the primary server is not specified or the specified IP address
	is to be removed, the status is blocked.
	Specify the IP address of the secondary server.
	If no secondary server is specified, the text box displays 0.0.0.0.
Secondary Server IP	To remove the previously configured secondary server, enter 0.0.0.0 in the text
	box.
	The specified IP address of the secondary server cannot be the same as that of
	the primary server.
	Specify the UDP port of the secondary server.
Secondary Server UDP Port	If the IP address of the secondary server is not specified or the specified IP
	address is to be removed, the port number is 1812 for authentication or 1813
	for accounting.
	Status of the secondary server, including:
	∙ active: The server is working normally.
Secondary Server Status	∙ blocked: The server is down.
	If the IP address of the secondary server is not specified or the specified IP
	address is to be removed, the status is blocked.

Return to RADIUS configuration task list.

Configuring RADIUS parameters

From the navigation tree, select Authentication  RADIUS and then select the RADIUS Setup tab to enter the RADIUS parameter configuration page, as shown in a.