A management IP address is the IP address of a VLAN interface, which can be used to access the device. You can also set configure a VLAN interface and its IP address in the page you enter by selecting Network
VLAN Interface. For more information, see the chapter “VLAN interface configuration”.
After finishing the configuration, click Next to enter the management IP address configuration page, as shown in a.
a.Management IP address configuration page
2.Management IP address configuration items
Item | Description |
| |
| Select a VLAN interface. | ||
Select VLAN Interface | Available VLAN interfaces are those configured in the page you enter by selecting | ||
| Network VLAN Interface and selecting the Create tab. | ||
|
| ||
| Enable or disable the VLAN interface. | ||
| When errors occurred on the VLAN interface, disable the interface and then enable | ||
| the port to bring the port to work properly. | ||
Admin Status | By default, the VLAN interface is in the down state if all Ethernet ports in the VLAN are | ||
down. The VLAN is in the up state if one or more ports in the VLAN are up. | |||
| |||
| IMPORTANT: | ||
| Disabling or enabling the VLAN interface does not affect the status of the Ethernet ports | ||
| in the VLAN. That is, the port status does not change with the VLAN interface status. | ||
Configure IPv4 | DHCP | Configure how the VLAN interface obtains an IPv4 address. | |
address | ∙ DHCP: Specifies the VLAN interface to obtain an IPv4 address by | ||
| |||
|
|
| |
|
| 30 | |