AT&T DS1/DMi/ISDN-PRI 120ADMINISTRATION Options and Requirements Generic, Synchronization Plan

7-120ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1

		SYNCHRONIZATION		PLAN	Page 1 of 1
	SYNCHRONIZATION SOURCE (DS1 circuit pack location)
	Primary: _ _ _		Secondary: _ _ _
		DS1	CIRCUIT PACKS
Location Name		Slip	Location Name		Slip
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_
_ _ _	_______________	_	_ _ _	_______________	_

Figure 7-62.Synchronization Plan Screen

Primary The 3-character location of the circuit pack that is the primary synchronization reference.

NOTE: The primary will be the DS1 circuit pack administered with slip detection y. The location, name, and slip (that is, slip detection) fields list the DS1 circuit packs that have been administered on the DS1 CIRCUIT PACK screen. The primary and secondary source must be selected from this list.

Secondary The 3-character location of the circuit pack that is the secondary synchronization reference. There is no requirement that a secondary source be provided. However, it is a good practice.

The Command Line Feature set provides four executable commands for controlling and monitoring synchronization. They are:

●Disable

●Enable

●Status

●Set