AT&T DS1/DMi/ISDN-PRI Procedure 309 Word 5 ARS-ISDN Bccos, Enhanced Mode Procedure 309, Word

		ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2	7-101
Field 12	Specifies the number	(designation) of the interexchange carrier (IXC)/ISDN
	Network Identifier for this trunk group. Permitted field entries may be any number
	within the range of 0	through 999.

NOTE: The IXC/ISDN network identifier enables the switch to provide equal access capability.

When the trunk group is routed over private network ISDN-PRI transmission facilities, then no IXC/ISDN network is used and the zero (0) option must be translated.

Each network provider (of ISDN service) will have a different IXC identifier number. When connecting to AT&T ISDN network facilities, the required number is 288.

Procedure 309 Word 5: ARS–ISDN BCCOS

This procedure is required for translating ISDN trunk groups into the ARS plan. Figure 7-50, Procedure 309 Word 5: ARS–ISDN BCCOS, depicts this procedure.

	ENHANCED MODE - PROCEDURE: 309, WORD: 5
	ARS - ISDN AND BEARER CAPABILITY COS
1.	ARS Plan:

2.Pattern Number:

3.Preference Number:

4.ISDN Dynamic Trunk Type:

5.ISDN Network Service Value:

6.Bearer Capability COS:

Connected to CC0 ON-LINE

enter command:

Figure 7-50.Procedure 309 Word 5: ARS-ISDN BCCOS (Generic 2)