ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1
7-133
TRUNK FEATURES Page 2 of 11
ACA Assignment?
Short Holding Time (secs.):
MIS Measured?
Used For DCS?
Maintenance Tests?
n
10
n
n
y
Long Holding Time (hours):
Short Holding Threshold:
Internal Alert?
PBX ID: 1Data Restriction?
Send SID?
Send Name?
1
15
n
n
n
n
Service/
Feature Called
Len Called
Number Del Insert Per Call
SID/ANI Night
Serv
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
___
___
___
___
___
___
___
___
___
___
___
___
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
___
___
___
___
___
___
___
___
___
___
___
___
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
Figure 7-71. Trunk Group Screen, Page 2 (ISDN-PRI)Only the new ISDN-PRI service application fields or those fields that require special or additionalconsiderations are mentioned here.Send SI This field determines whether the Station Identification (SID) number is sent to thenetwork for both incoming and/or outgoing ISDN calls. For outgoing calls, theuser's calling party number is sent. For incoming calls, the number associated withthe answering party is sent. Field encodes and their descriptions are:ynSend the SID.NOTE: If SID is enabled, then the SID PREFIX TABLE screen must becompleted.Do not send the SID (default).NOTE: Both SID and ANI significantly enhance the AT&T ISDN networkcapabilities. The customer can subscribe to the SID/ANI service and have arepresentation of the calling party number forwarded from the AT&Tnetwork to the terminating switch. Therefore, consider provisioning andenabling the SID/ANI option as part of the installation/administrationprocess.