Cooling Features

The 8321 series frames come standard with the Cooling Fan Module installed as original equipment from the factory. However, if you need to replace the ventilation in a 8321 series frame door, the optional CFM-8321 Cooling Fan Module is available as a field installation kit.

Cooling Fan Functions and User Controls

The 8321 series frames includes Fault LEDs and the Alarm mute button on the front of the frame door. For details on the LED functions, refer to Table 2.2. For operational details for your MFC- 8300 series controller card, refer to the MFC-8300 Series User Manual.

Figure 4.5 8321 Series Frame Door Features

Replacing the CFM-8321 Cooling Fan Module

This section includes instructions on installing the CFM-8321 Cooling Fan Module Replacement Kit. The CFM-8321 Cooling Fan Module Replacement Kit includes the fan board and filter pre- installed in a new 8321 series frame door.

Use the following procedure to replace the CFM-8321 Cooling Fan Module:

1.Carefully remove the door from the frame as follows:

Gently pull the side door tabs towards the center of the door, releasing the door from the frame. The door extender arms prevent the door from falling.

Using both hands, pull the door towards you.

Tilt the door upward until the arms match the cutout.

Gently push the door extender arms in and over the retaining bolts and unhook from the frame.

2.Remove the door and place it on a clean, flat, static-free surface

3.On the new frame door of the CFM-8321 Cooling Fan Module, verify that the Alarm Mute button pushes in and out without binding.

This completes the procedure for replacing the CFM-8321 Cooling Fan Module.

8310/8321 User Manual (V 1.0)

Page 41

Page 41
Image 41
Cobalt Networks 8321(-C), 8310(-C) user manual Cooling Features

8321(-C), 8310(-C) specifications

Cobalt Networks was known for its pioneering role in the development of high-performance server appliances, particularly with its 8300 series, which includes the 8310(-C) and 8321(-C) models. These devices are recognized for their reliability, scalability, and efficiency, making them ideal solutions for web hosting, content delivery, and database management.

The Cobalt 8310(-C) model primarily targets small to medium-sized businesses looking for a cost-effective yet powerful server solution. It features a robust hardware design, powered by a dedicated processor that ensures speedy performance and low latency for applications. With its capacity to handle multiple simultaneous connections, the 8310(-C) is well-suited for web applications and e-commerce platforms. Its compact form factor allows for easy installation in server racks, contributing to efficient space utilization in data centers.

On the other hand, the Cobalt 8321(-C) is designed for larger enterprises requiring enhanced performance and greater scalability. This model includes a multicore processor and offers higher RAM and storage options, allowing businesses to support more demanding applications and larger databases. The 8321(-C) is particularly beneficial for organizations that anticipate growth, as it can be easily scaled up with additional resources, ensuring that service quality remains consistent even during peak loads.

Both models share several key features that underscore Cobalt Networks' commitment to performance and reliability. They incorporate advanced cooling technologies to maintain optimal operating temperatures, prolonging hardware lifespan and enhancing reliability. Additionally, both models support a variety of operating systems and virtualization technologies, providing the flexibility needed to run diverse applications.

Security is another critical characteristic of the 8310(-C) and 8321(-C). They come equipped with robust security protocols, including firewall and intrusion detection systems, ensuring that sensitive data is protected from unauthorized access and cyber threats.

In summary, the Cobalt Networks 8310(-C) and 8321(-C) models stand out due to their performance, scalability, and security features. These servers are suited for businesses of varying sizes, supporting a range of applications while ensuring reliability and efficiency in demanding environments. As organizations continue to embrace digital transformation, these models remain relevant due to their robust technologies and capabilities.