AT&T DS1/DMi/ISDN-PRI manual From 1 to

			ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2	7-95
Field 1	Assigns	either an	extension number, vector directory number, or trunk group. Field
	encodes	and their	descriptions are:

●000 through 99999, for extension and directory numbers. Whether the number is three, four, or five digits depends on the numbering plan.

●18 through 999, for trunk group numbers.

Field 2	Specifies whether the encode for field 1 is a trunk group or extension/vector
	directory	number. Field encodes and their descriptions are:
	0 Trunk	groups
	1 Extension numbers and vector directory numbers
Field 3	This field is only applicable for the identified extension’s display module. It controls
	the number of blank spaces that are inserted before the first displayed character of
	the name, dialed number, or trunk group name. Permitted encodes are numbers
	from 1 to 30.
Field 4	The main function of this field is to provide some administration control over what
	is displayed on the voice terminals digital display. Field encodes and their
	descriptions are:

– (Dash) all incoming only trunk groups

0The user (extension) does not want the outgoing trunk group name displayed but does desire the dialed number to remain on the display

1The user desires to display the name of the outgoing trunk group (for example, ISDN/SDN, MEGACOM, CBC)

	NOTE: For a tandem interworking call the name of the incoming trunk
	group is transmitted in the display IE of the ISDN-PRI outgoing trunk
	group.
Field 5	Assigns the method used to define the name. Field encodes and their descriptions
	are:
	0 Add a new name or change an existing name; requires that the name change be
	made with word 2
	1 Copy the name from the extension or trunk group displayed in field 6
Field 6	This field is used with field 5 to copy an existing name to the extension or trunk
	group identified in field 1. Field encodes and their descriptions are:

●000 through 99999, for extension and directory numbers. Whether the number is three, four, or five digits depends on the numbering plan.

●18 through 999, for trunk group numbers.

Procedure 012 Word 2: Name Database

This word is used to translate a name (up to a maximum of 30 characters). Figure 7-46,Procedure 012 Word 2: Name Database, depicts this procedure.