AT&T DS1/DMi/ISDN-PRI manual Or is not 0 supported

ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2 7-79

ENHANCE MODE - PROCEDURE: 014, WORD: 2

BEARER CAPABILITY CLASS OF SERVICE - DATA OPTIONS

1. Bearer Capability COS:

DATA RATE

2.64000 bps:

3.56000 bps:

4.19200 bps:

5.9600 bps:

6.4800 bps:

7.2400 bps:

8.1200 bps:

9.300 bps:

10.Low Speed:

11.Synchronous:

12.Duplex:

13.Clock:

14.Default Data Rate:

Connected to CC0 ON-LINE

enter command:

Figure 7-37.Procedure 014 Word 2: BCCOS Data Options

Field 1Translates BCCOS modem pool support. Field encodes and their descriptions are: ● Dash (–)is used when the BCCOS does not support modem pools

● Numbers between (0 and 255)

Fields 2-10These fields select the data rates (64000, 56000, 19200, 9600, 4800, 2400, 1200, 300, or low speed) supported by this modem pool. Field encodes and their descriptions are:

0 Not supported

1 Supported

Field 11	Defines if synchronization is (1)	or is not (0) supported.
Field 12	Defines if half (1) or full (0)	duplex operation is supported.
Field 13	Defines if an external (1) or an internal (0) clock source is used.
Field 14	Whenever a modem pool supports more than one data rate it is generally desirable
	to assign one data rate as a default or first choice. Field encodes and their

descriptions are numbers (1 through 9; which correspond to Low, 300,...64000-bps respectively).