AT&T DS1/DMi/ISDN-PRI 98ADMINISTRATION Options and Requirements Generic, Isdn Network Definition

7-98ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2

ENHANCED MODE - PROCEDURE: 279, WORD: 1

NETWORK-SPECIFIC FACILITY

1. ISDN Network Service Value:

ISDN NETWORK DEFINITION

2.Paramaterized - Binary:

3.Feature - Service:

4.Facility Coding Value:

PARAMETERS

5.Parameter 1:

6.Parameter 2:

7.Parameter 3:

8.Parameter 4:

9.Parameter 5:

10.Parameter 6:

11.Parameter 7:

Connected to CC0 ON-LINE

enter command:

Figure 7-48.Procedure 279 Word 1: Network Facilities Coding (Generic 2)

Field 1Translates Network Service. Field encodes and their descriptions are:

●Dash (-),whenever a carrier identifier number is not applicable.

●Numbers (1 through 511).

For most ISDN public network connections it is expected that the CBC Service Selection capability will be implemented. With this capability the ISDN B-channels must (on a per-call basis) support multiple ISDN features and services. The public network CO originates an incoming call by transmitting a call-setup message to the switch. The call-setup message contains a NSF IE that identifies the ISDN feature/service. At the switch, fields 2 through 11 are used to define the various ISDN public network features and services. Table 7-11,Network Services/Network Features, lists the currently available AT&T ISDN network services and features and their further defining attributes.