Brocade Communications Systems manual Brocade ICX 6650 Administration Guide 53-1002600-01

8 LLDP-MED configuration

For tagged traffic

Syntax: [no] lldp med network-policy application <application type> tagged vlan <vlan ID> priority <0 – 7> dscp <0 – 63> ports ethernet <stack-unit>/<slot>/<port>all

For untagged traffic

Syntax: [no] lldp med network-policy application <application type> untagged dscp <0 – 63> ports ethernet <stack-unit>/<slot>/<port>all

For priority-tagged traffic

Syntax: [no] lldp med network-policy application <application type> priority-tagged priority <0 – 7> dscp <0 – 63> ports ethernet <stack-unit>/<slot>/<port>all

Specify the ethernet port in the <stack-unit>/<slot>/<port>format. Stack-unit is 1.

You can list all of the ports individually, use the keyword to to specify ranges of ports, or a combination of both. To apply the configuration to all ports on the device, use the keyword all instead of listing the ports individually.

The <application type> variable indicates the primary function of the applications defined by this network policy. Application type can be one of the following:

•guest-voice– Limited voice service for guest users and visitors with their own IP telephony handsets or similar devices that support interactive voice services.

•guest-voice-signaling– Limited voice service for use in network topologies that require a different policy for guest voice signaling than for guest voice media.

•softphone-voice– Softphone voice service for use with multi-media applications that work in association with VoIP technology, enabling phone calls direct from a PC or laptop. Softphones do not usually support multiple VLANs, and are typically configured to use an untagged VLAN or a single tagged data-specific VLAN. Note that when a network policy is defined for use with an untagged VLAN, the Layer 2 priority field is ignored and only the DSCP value is relevant.

•streaming-video– Applies to broadcast- or multicast-based video content distribution and similar applications that support streaming video services requiring specific network policy treatment. Video applications that rely on TCP without buffering would not be an intended use of this application type.

•video-conferencing– Applies to dedicated video conferencing equipment and similar devices that support real-time interactive video/audio services.

•video-signaling– For use in network topologies that require a separate policy for video signaling than for video media. Note that this application type should not be advertised if all the same network policies apply as those advertised in the video conferencing policy TLV.

•voice – For use by dedicated IP telephony handsets and similar devices that support interactive voice services.

•voice-signaling– For use in network topologies that require a different policy for voice signaling than for voice media. Note that this application type should not be advertised if all the same network policies apply as those advertised in the voice policy TLV.

•tagged vlan <vlan id> specifies the tagged VLAN that the specified application type will use.

•untagged indicates that the device is using an untagged frame format.

•priority-taggedindicates that the device uses priority-tagged frames. In this case, the device uses the default VLAN (PVID) of the ingress port.

216	Brocade ICX 6650 Administration Guide
	53-1002600-01