Brocade Communications Systems 6650 manual Field Description

4 Viewing information about PoD licenses

Table 19 describes the information displayed by the show license unit unit_id [index index_number] command.

TABLE 19	Output from the show license unit_id [index index_number] command
Field		Description
+license name		The name of the license installed on the unit.
+lid		The license ID. This number is embedded in the Brocade device.
+license type		Indicates the license is normal (permanent).
+status		Indicates the status of the license:
		• Valid – A license is valid if the LID matches the serial number of the
		device for which the license was purchased, and the package name
		is recognized by the system.
		• Invalid – The LID does not match the serial number of the device
		for which the license was purchased.
		• Active – The license is valid and in effect on the device.
		• Not used – The license is not in effect on the device.
+license period		The license type is normal (permanent), This field displays Unlimited.

Displaying the license configuration for PoD ports for the Brocade ICX 6650

To display the license configuration for PoD ports in the system, enter the show pod command at the CLI level. In the following output, the 16-port capacity license is used for the 10 GbE PoD license, and the 6-port capacity license is used for the 40 GbE PoD license.

94	Brocade ICX 6650 Administration Guide
	53-1002600-01