Brocade Communications Systems 6650 manual Displaying the IPv6 route table

	Displaying global IPv6 information	5
TABLE 31	IPv6 neighbor information fields (Continued)
Field	Description
Age	The number of seconds the entry has remained unused. If this value
	remains unused for the number of seconds specified by the ipv6 nd
	reachable-time command (the default is 30 seconds), the entry is
	removed from the table.
Port	The physical port on which the entry was learned.
vlan	The VLAN on which the entry was learned.
IsR	Determines if the neighbor is a router or host:
	0 – Indicates that the neighbor is a host.
	1 – Indicates that the neighbor is a router.

Displaying the IPv6 route table

To display the IPv6 route table, enter the following command at any CLI level.

Brocade#show		ipv6 route	entries:
IPv6	Routing	Table - 58
Type	Codes:	C - Connected, S - Static, R - RIP, O - OSPF, B - BGP

OSPF Sub Type Codes:		O - Intra, Oi - Inter, O1 - Type1 external, O2		- Type2 ext
ernal		Next Hop Router	Interface	Dis/Metric
Type IPv6 Prefix
C	2001:DB8:9::/64	::	ve 1009	0/0
C	2001:DB8:a::/64	::	ve 1010	0/0
C	2001:DB8:b::/64	::	ve 1011	0/0
C	2001:DB8:c::/64	::	ve 1012	0/0
C	2001:DB8:d::/64	::	ve 1013	0/0
C	2001:DB8:e::/64	::	ve 1014	0/0
C	2001:DB8:f::/64	::	ve 1015	0/0
C	2001:DB8:10::/64	::	ve 1016	0/0
C	2001:DB8:11::/64	::	ve 1017	0/0
C	2001:DB8:12::/64	::	ve 1018	0/0
C	2001:DB8:13::/64	::	ve 1019	0/0

Syntax: show ipv6 route [<ipv6-address> <ipv6-prefix>/<prefix-length> bgp connect ospf rip static summary]

The <ipv6-address>parameter restricts the display to the entries for the specified IPv6 address. You must specify the <ipv6-address>parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373.

The <ipv6-prefix>/<prefix-length>parameters restrict the display to the entries for the specified IPv6 prefix. You must specify the <ipv6-prefix>parameter in hexadecimal using 16-bit values between colons as documented in RFC 2373. You must specify the <prefix-length>parameter as a decimal value. A slash mark (/) must follow the <ipv6-prefix>parameter and precede the <prefix-length>parameter.

The bgp keyword restricts the display to entries for BGP4 routes.

The connect keyword restricts the display to entries for directly connected interface IPv6 routes. The ospf keyword restricts the display to entries for OSPFv3 routes.

The rip keyword restricts the display to entries for RIPng routes.

Brocade ICX 6650 Administration Guide	145
53-1002600-01