Brocade Communications Systems 6650 Enabling ports on the rear panel

Brocade ICX 6650 Administration Guide 87
53-1002600-01
Ports on Demand Licensing 4
Syntax: show pod
For more information about the license delete command, refer to “Deleting a 10 GbE or 40 GbE
license” on page90.
Enabling ports on the rear panel
By default, ports on the rear panel are in an error-disabled state. Use the ICX6650-40G-LIC-POD
license to enable these ports. Once enabled, ports 1/2/1 through 1/2/4 are at 40 GbE port speed,
and ports 1/3/1 through 1/3/8 are at 10 GbE port speed.
1. Download the ICX6650-40G-LIC-POD license from the Brocade software portal.
2. Place the license file on a TFTP or SCP server to which the Brocade device has access.
3. Use TFTP or SCP to copy the file to the license database of the Brocade device.
To use TFTP to copy the file to the license database of the Brocade device, enter the following
command.
Brocade# copy tftp license 10.120.54.185 lic.xml unit 1
Syntax: copy tftp license [IP_address| ipv6_address] license_filename_on_host unit unit_id
The IP_address variable is the address of the IPv4 TFTP server.
Brocade#show pod
Unit-Id: 1
PoD 10G license capacity: 8
PoD 10G license capacity used: 8
PoD 40G license capacity: 6
PoD 40G license capacity used: 6
PoD-ports Lic-Available Lic-Used
1/1/33 Yes Yes
1/1/34 Yes Yes
1/1/35 Yes Yes
1/1/36 Yes Yes
1/1/37 Yes Yes
1/1/38 Yes Yes
1/1/39 Yes Yes
1/1/40 Yes Yes
1/1/41 No No
1/1/42 No No
1/1/43 No No
1/1/44 No No
1/1/45 No No
1/1/46 No No
1/1/47 No No
1/1/48 No No
1/1/49 No No
1/1/50 No No
1/1/51 No No
1/1/52 No No
1/1/53 No No
1/1/54 No No
1/1/55 No No
1/1/56 No No