A

Syslog messages

 

 

 

 

 

TABLE 57

Brocade Syslog messages (Continued)

 

 

 

 

 

 

 

 

 

Message level

Message

Explanation

 

 

 

 

 

 

 

Notification

OSPF virtual nbr state changed,

Indicates that the state of an OSPF virtual

 

 

 

rid <router-id>, nbr addr <ip-addr>,

neighbor has changed.

 

 

 

nbr rid <nbr-router-id>, state <ospf-state>

The <router-id>is the router ID of the

 

 

 

 

Product Name device.

 

 

 

 

The <ip-addr>is the IP address of the

 

 

 

 

neighbor.

 

 

 

 

The <nbr-router-id> is the router ID of the

 

 

 

 

neighbor.

 

 

 

 

The <ospf-state>indicates the state to

 

 

 

 

which the interface has changed and can

 

 

 

 

be one of the following:

 

 

 

 

down

 

 

 

 

attempt

 

 

 

 

initializing

 

 

 

 

2-way

 

 

 

 

exchange start

 

 

 

 

exchange

 

 

 

 

loading

 

 

 

 

full

 

 

 

 

unknown

 

 

 

 

 

 

 

Notification

Transit ICMP in interface <portnum>

Threshold parameters for ICMP transit

 

 

 

exceeds <num> burst packets, stopping for

(through) traffic have been configured on

 

 

 

<num> seconds!!

an interface, and the maximum burst size

 

 

 

 

for ICMP packets on the interface has been

 

 

 

 

exceeded.

 

 

 

 

The <portnum> is the port number.

 

 

 

 

The first <num> is the maximum burst size

 

 

 

 

(maximum number of packets allowed).

 

 

 

 

The second <num> is the number of

 

 

 

 

seconds during which additional ICMP

 

 

 

 

packets will be blocked on the interface.

 

 

 

 

NOTE: This message can occur in response

 

 

 

 

 

to an attempted Smurf attack.

 

 

 

 

 

 

 

Notification

Transit TCP in interface <portnum> exceeds

Threshold parameters for TCP transit

 

 

 

<num> burst packets, stopping for <num>

(through) traffic have been configured on

 

 

 

seconds!

an interface, and the maximum burst size

 

 

 

 

for TCP packets on the interface has been

 

 

 

 

exceeded.

 

 

 

 

The <portnum> is the port number.

The first <num> is the maximum burst size (maximum number of packets allowed). The second <num> is the number of seconds during which additional TCP packets will be blocked on the interface.

NOTE: This message can occur in response to an attempted TCP SYN attack.

294

Brocade ICX 6650 Administration Guide

 

53-1002600-01

Page 312
Image 312
Brocade Communications Systems 6650 manual Rid router-id, nbr addr ip-addr