Brocade Communications Systems 6650 manual Clearing cached Lldp neighbor information

8 Clearing cached LLDP neighbor information

You can list all of the ports individually, use the keyword to to specify ranges of ports, or a combination of both. To apply the configuration to all ports on the device, use the keyword all instead of listing the ports individually.

Clearing cached LLDP neighbor information

The Brocade device clears cached LLDP neighbor information after a port becomes disabled and the LLDP neighbor information ages out. However, if a port is disabled then re-enabled before the neighbor information ages out, the device will clear the cached LLDP neighbor information when the port is re-enabled.

If desired, you can manually clear the cache. For example, to clear the cached LLDP neighbor information for port e 1/1/1, enter the following command at the Global CONFIG level of the CLI.

Brocade#clear lldp neighbors ports e 1/1/1

Syntax: clear lldp neighbors [ports ethernet <stack-unit>/<slot>/<port>all]

If you do not specify any ports or use the keyword all, by default, the system will clear the cached LLDP neighbor information for all ports.

Specify the ethernet port in the <stack-unit>/<slot>/<port>format. Stack-unit is 1.

You can list all of the ports individually, use the keyword to to specify ranges of ports, or a combination of both. To apply the configuration to all ports on the device, use the keyword all instead of listing the ports individually.

224	Brocade ICX 6650 Administration Guide
	53-1002600-01