Brocade Communications Systems 6650 manual Syntax show license unit unitid

Viewing information about PoD licenses 4

To display PoD license information for unit 1 on a Brocade ICX 6650 device, enter the show license unit unit_id command. In the following example, the 10 GbE and 40 GbE Brocade ICX 6650 PoD licenses are installed on unit 1.

Brocade#show license unit 1		Lid	License Type	Status	License Period	License Capacity
Index	License Name
Stack unit 1:		egpHKHKjFFL	Normal	Active	Unlimited	24
1	ICX6650-10G-LIC-POD
2	ICX6650-40G-LIC-POD	egpHKHKjFFL	Normal	Active	Unlimited	6

Syntax: show license [unit unit_id]

The unit unit_id parameter specifies the unit ID number.

Table 18 describes the information displayed by the show license unit unit_id command

TABLE 18	Output from the show license unit command
Field		Description
Index		The index number specifies the PoD license file for a specific unit. The
		index number is generated by the member unit.
License Name		The name of license installed for the license index number on the unit.
Lid		The license ID. This number is embedded in the Brocade device.
License Type		Indicates the license is normal (permanent).
Status		Indicates the status of the license:
		• Valid – A license is valid if the LID matches the serial number of the
		device for which the license was purchased, and the package name
		is recognized by the system.
		• Invalid – The LID does not match the serial number of the device
		for which the license was purchased.
		• Active – The license is valid and in effect on the device.
		• Not used – The license is not in effect on the device.
License Period		The license type is normal (permanent). The field displays Unlimited.
License Capacity		The port capacity of the PoD license. The 10 GbE PoD license consists of
		an 8-, 16-, or 24-port capacity license. The 40 GbE PoD license consists
		of 2-, 4-, or 6-port capacity license.

To display detailed information about a specific license on unit 1, use the show license unit unit_id [index index_number] command. The following example shows sample output.

Brocade#show license unit 1 index 1

License information for unit 1 license <1>:

+license name:	ICX6650-10G-LIC-POD
+lid:	egpHKHKjFFL
+license type:	normal
+status:	active
+license period:	unlimited

Syntax: show license unit unit_id [index index_number]

The unit unit_id variable specifies the unit ID number. The unit ID number is 1.

The index license_index option specifies the software license file, and is generated by the member unit.

Brocade ICX 6650 Administration Guide	93
53-1002600-01