Brocade Communications Systems 6650 manual Setting the alarm interval

9 Digital optical monitoring

Setting the alarm interval

You can optionally change the interval between which alarms and warning messages are sent. The default interval is three minutes. To change the interval, use the following command.

Brocade(config)#interface ethernet 1/1/1 to 1/1/2

Brocade(config-mif-1/1/1-1/1/2)#optical-monitor 10

Syntax: [no] optical-monitor [<alarm-interval>]

For <alarm-interval>, enter a value between 1 and 65535. Enter 0 to disable alarms and warning messages.

NOTE

The commands no optical-monitorand optical-monitor 0 perform the same function. That is, they both disable digital optical monitoring.

Displaying information about installed media

Use the show media, show media slot, and show media ethernet commands to obtain information about the media devices installed per device, per slot, and per port. The results displayed from these commands provide the Type, Vendor, Part number, Version and Serial number of the SFP, SFP+, or XFP optical device installed in the port. If there is no SFP, SFP+, or XFP optical device installed in a port, the “Type” field will display “EMPTY”.

Use the show media command to obtain information about the media devices installed in a device.

Brocade#show	media	1M (SFP +)
Port 1/1/1:	Type : 10GE Twinax
Port 1/1/2:	Type : 10GE Twinax	1M (SFP +)
Port 1/1/3:	Type : 10GE Twinax	1M (SFP +)
Port 1/1/4:	Type : 10GE Twinax	1M (SFP +)
Port 1/1/5: Type : 1G M-TX(SFP)
Port 1/1/6: Type : 1G M-TX(SFP)
Port 1/1/7: Type : EMPTY
Port 1/1/8: Type : EMPTY		3M (SFP +)
Port 1/1/9:	Type : 10GE Twinax
Port 1/1/10:	Type : 10GE Twinax	3M (SFP +)
Port 1/1/11: Type : EMPTY
Port 1/1/12: Type : EMPTY
Port 1/1/13: Type : EMPTY
Port 1/1/14: Type : EMPTY
Port 1/1/15:	Type : 10GE SR 300m (SFP +)
Port 1/1/16: Type : EMPTY
Port 1/1/17: Type : EMPTY
Port 1/1/18: Type : EMPTY
Port 1/1/19: Type : EMPTY
Port 1/1/20: Type : EMPTY
Port 1/1/21: Type : EMPTY
Port 1/1/22: Type : EMPTY
Port 1/1/23: Type : EMPTY
Port 1/1/24: Type : EMPTY		3M (SFP +)
Port 1/1/25:	Type : 10GE Twinax
Port 1/1/26:	Type : 10GE Twinax	3M (SFP +)
Port 1/1/27: Type : EMPTY
Port 1/1/28: Type : EMPTY
Port 1/1/29:	Type : EMPTY

226	Brocade ICX 6650 Administration Guide
	53-1002600-01