Brocade Communications Systems 6650 manual Chassis temperature has risen above the warning level

		Syslog messages	A
TABLE 57	Brocade Syslog messages (Continued)
Message level	Message	Explanation
Warning	No global IP! cannot send IGMP msg.	The device is configured for ip multicast
		active but there is no configured IP address
		and the device cannot send out IGMP
		queries.

Warning	No of prefixes received from BGP peer
	<ip-addr>exceeds warning limit <num>

The Layer 3 Switch has received more than the allowed percentage of prefixes from the neighbor.

The <ip-addr>is the IP address of the neighbor.

The <num> is the number of prefixes that matches the percentage you specified. For example, if you specified a threshold of 100 prefixes and 75 percent as the warning threshold, this message is generated if the Layer 3 Switch receives a 76th prefix from the neighbor.

Warning	NTP server <ip-addr>failed to respond	Indicates that a Simple Network Time
		Protocol (SNTP) server did not respond to
		the device query for the current time.
		The <ip-addr>indicates the IP address of
		the SNTP server.
Warning	rip filter list <list-num> <direction> V1 V2	Indicates that a RIP route filter denied
	denied <ip-addr>, <num> packets	(dropped) packets.
		The <list-num>is the ID of the filter list.
		The <direction> indicates whether the filter
		was applied to incoming packets or
		outgoing packets. The value can be one of
		the following:
		•	in
		•	out

The V1 or V2 value specifies the RIP version (RIPv1 or RIPv2).

The <ip-addr>indicates the network number in the denied updates.

The <num> indicates how many packets matching the values above were dropped during the five-minute interval represented by the log entry.

Warning Temperature is over warning level.

The chassis temperature has risen above the warning level.

Brocade ICX 6650 Administration Guide	297
53-1002600-01