Brocade Communications Systems 6650 manual 40GigabitEthernet1/2/1 is up, line protocol is up

Viewing information about PoD licenses 4

Brocade# show interface ethernet 1/1/33

10GigabitEthernet1/1/33 is ERR-DISABLED (invalid license), line protocol is down

Hardware is 10GigabitEthernet, address is 748e.f80c.5f40(bia 748e.f80c.5f40) Interface type is unknown

Configured speed 10Gbit, actual unknown, configured duplex fdx, actual unknown

Member of L2 VLAN ID 1, port is untagged, port state is DISABLED BPDU guard is Disabled, ROOT protect is Disabled

Link Error Dampening is Disabled

STP configured to ON, priority is level0, mac-learning is enabled Flow Control is enabled

Mirror disabled, Monitor disabled Not member of any active trunks Not member of any configured trunks No port name

A port is in a down state when there is no physical link between two devices, and a license is installed in the device. The show interface ethernet command displays the port in the down state. The following example output is from a Brocade ICX 6650 device.

Brocade# show interface ethernet 1/1/33 10GigabitEthernet1/1/33 is down, line protocol is down

Hardware is 10GigabitEthernet, address is 748e.f80c.5f40(bia 748e.f80c.5f40) Interface type is unknown

Configured speed 10Gbit, actual unknown, configured duplex fdx, actual unknown

Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING BPDU guard is Disabled, ROOT protect is Disabled

Link Error Dampening is Disabled

STP configured to ON, priority is level0, mac-learning is enabled Flow Control is enabled

Mirror disabled, Monitor disabled Not member of any active trunks Not member of any configured trunks No port name

A port is in an up state when a physical link is established between two devices, and a license is installed in the device. The show interface ethernet command displays the port in the up state. The following example output is from a Brocade ICX 6650 device.

Brocade# show interface ethernet 1/2/1

40GigabitEthernet1/2/1 is up, line protocol is up

Hardware is 40GigabitEthernet, address is 748e.f80c.5f40(bia 748e.f80c.5f40) Interface type is 40Gig Copper

Configured speed 40Gbit, actual 40Gbit, configured duplex fdx, actual fdx Configured mdi mode AUTO, actual none

Member of 1 L2 VLANs, port is tagged, port state is FORWARDING BPDU guard is Disabled, ROOT protect is Disabled

Link Error Dampening is Disabled

STP configured to ON, priority is level0, mac-learning is enabled Flow Control is enabled

Mirror disabled, Monitor disabled

Member of active trunk ports 1/2/1,1/2/2,1/2/3,1/2/4, primary port Member of configured trunk ports 1/2/1,1/2/2,1/2/3,1/2/4, primary port No port name

Brocade ICX 6650 Administration Guide	97
53-1002600-01