Brocade Communications Systems 6650 manual Syntax show lldp statistics

8 LLDP-MED attributes advertised by the Brocade device

Brocade#show lldp statistics				minutes 40 seconds ago
Last neighbor change time: 23 hours 50
Neighbor entries added			: 14
Neighbor entries deleted			: 5
Neighbor entries aged out			: 4
Neighbor advertisements dropped : 0
Port	Tx Pkts	Rx Pkts	Rx Pkts	Rx Pkts	Rx TLVs	Rx TLVs Neighbors
1	Total	Total	w/Errors	Discarded Unrecognz Discarded			Aged Out
	60963	75179	0	0	0	0	4
2	0	0	0	0	0	0	0
3	60963	60963	0	0	0	0	0
4	60963	121925	0	0	0	0	0
5	0	0	0	0	0	0	0
6	0	0	0	0	0	0	0
7	0	0	0	0	0	0	0
8	0	0	0	0	0	0	0
9	0	0	0	0	0	0	0
10	60974	0	0	0	0	0	0
11	0	0	0	0	0	0	0
12	0	0	0	0	0	0	0
13	0	0	0	0	0	0	0
14	0	0	0	0	0	0	0

Syntax: show lldp statistics

NOTE

You can reset LLDP statistics using the CLI command clear LLDP statistics. Refer to “Resetting LLDP statistics” on page 223.

The following table describes the information displayed by the show lldp statistics command.

Field	Description
Last neighbor change	The elapsed time (in hours, minutes, and seconds) since a neighbor last advertised
time	information. For example, the elapsed time since a neighbor was last added, deleted, or
	its advertised information changed.
Neighbor entries added	The number of new LLDP neighbors detected since the last reboot or since the last time
	the clear lldp statistics all command was issued.
Neighbor entries	The number of LLDP neighbors deleted since the last reboot or since the last time the
deleted	clear lldp statistics all command was issued.
Neighbor entries aged	The number of LLDP neighbors dropped on all ports after the time-to-live expired.
out	Note that LLDP entries age out naturally when a port cable or module is disconnected or
	when a port becomes disabled. However, if a disabled port is re-enabled, the system
	will delete the old LLDP entries.
Neighbor	The number of valid LLDP neighbors the device detected, but could not add. This can
advertisements	occur, for example, when a new neighbor is detected and the device is already
dropped	supporting the maximum number of neighbors possible. This can also occur when an
	LLDPDU is missing a mandatory TLV or is not formatted correctly.
Port	The local port number.
Tx Pkts Total	The number of LLDP packets the port transmitted.

220	Brocade ICX 6650 Administration Guide
	53-1002600-01