Brocade Communications Systems 6650 manual Displaying Lldp statistics and configuration settings

8 LLDP-MED attributes advertised by the Brocade device

Brocade(config)#lldp advertise med-capabilities ports e 1/1/1 to 1/1/5

The LLDP-MED capabilities advertisement will appear similar to the following on the remote device, and in the CLI display output on the Brocade device (show lldp local-info).

+MED capabilities: capabilities, networkPolicy, location, extendedPSE MED device type : Network Connectivity

Syntax: [no] lldp advertise med-capabilities ports ethernet <stack-unit>/<slot>/<port>all

Specify the ethernet port in the <stack-unit>/<slot>/<port>format. Stack-unit is 1.

You can list all of the ports individually, use the keyword to to specify ranges of ports, or a combination of both. To apply the configuration to all ports on the device, use the keyword all instead of listing the ports individually. Note that using the keyword all may cause undesirable effects on some ports. For example, if you configure all ports to advertise their VLAN name, and the configuration includes ports that are not members of any VLAN, the system will warn of the misconfigurations on non-member VLAN ports. The configuration will be applied to all ports, however, the ports that are not members of any VLAN will not send VLAN name advertisements.

Displaying LLDP statistics and configuration settings

You can use the following CLI show commands to display information about LLDP settings and statistics:

•show lldp – Displays a summary of the LLDP configuration settings.

•show lldp statistics – Displays LLDP global and per-port statistics.

•show lldp neighbors – Displays a list of the current LLDP neighbors.

•show lldp neighbors detail – Displays the details of the latest advertisements received from LLDP neighbors.

•show lldp local-info– Displays the details of the LLDP advertisements that will be transmitted on each port.

This above show commands are described in this section.

LLDP configuration summary

To display a summary of the LLDP configuration settings on the device, enter the show lldp command at any level of the CLI.

The following shows an example report.

Brocade#show lldp			: 10	seconds
LLDP transmit	interval
LLDP transmit	hold multiplier		: 4	(transmit TTL: 40 seconds)
LLDP transmit	delay	interval	: 1 seconds
LLDP SNMP notification			: 5 seconds
LLDP reinitialize delay			: 1 seconds
LLDP-MED fast	start repeat count : 3
LLDP maximum neighbors		per port	: 392
LLDP maximum neighbors			: 4

218	Brocade ICX 6650 Administration Guide
	53-1002600-01