SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PRODUCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 18 and 19)

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 18

SUSPENSION ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 19

FRONT-TO-BACK ADJUSTMENT (See Figs. 20and 21)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its high- est position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjustments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut “E” on both front links an equal number of turns.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

•To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns. The two front links must remain equal in length.

•When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

•Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 20

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 21

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 22)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

•Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

BELT INSTALLATION -

•Install new belt in reverse order of removal.

•Make sure belt is in all pulley grooves and inside all belt guides.

•Install mower in reverse order of removal instruc- tions.

20

Page 19 Page 21
Page 20
Image 20
McCulloch MC17542STA To Level Mower Housing, To Replace Mower Blade Drive Belt See Fig, Belt Removal, Belt Installation
Page 19 Page 21

MC17542STA, MC17542ST specifications

The McCulloch MC17542ST and MC17542STA lawn mowers are distinguished machines designed for homeowners seeking a reliable and efficient solution for lawn maintenance. These models combine powerful performance with user-friendly features, making them an excellent choice for small to medium-sized lawns.

One of the key features of the MC17542ST and its counterpart, the MC17542STA, is their robust 420cc engine, which provides ample power to tackle various types of grass and terrain. The engine is equipped with advanced technology that ensures reliable starting and efficient fuel consumption, contributing to reduced emissions and lower operational costs. This powerful engine allows users to maintain productivity without the frequent interruptions associated with refueling.

Both models are equipped with a 42-inch cutting deck, which enables wider cutting swath and enhances mowing efficiency. The cutting deck is made of durable materials, ensuring longevity and resistance to wear. Furthermore, the deck height can be easily adjusted, allowing users to achieve their desired grass height with a simple lever adjustment. This feature is particularly beneficial for maintaining a healthy lawn, catering to different grass types and seasonal growth patterns.

The MC17542ST and MC17542STA mowers also feature a comfortable and ergonomic design. The adjustable seat ensures that operators can find their ideal driving position, enhancing comfort during extended mowing sessions. The user-friendly controls are positioned intuitively for easy access, allowing for seamless operation even for those who are new to lawn care.

Another notable characteristic of these models is their zero-turn capability, making it easier to maneuver around obstacles such as trees, flower beds, and garden ornaments. This feature significantly reduces the time spent mowing, as operators can turn with precision and navigate tight spaces effortlessly.

Safety is paramount with the McCulloch MC17542ST and MC17542STA models. They come equipped with safety features such as blade brake systems that stop the blades almost instantly when the operator releases the control. This ensures peace of mind during operation and enhances overall user safety.

In conclusion, the McCulloch MC17542ST and MC17542STA mowers offer an impressive blend of power, efficiency, comfort, and safety. With their powerful engines, wide cutting deck, user-friendly design, and zero-turn capability, they stand out as excellent choices for anyone looking to maintain a beautiful lawn with minimal effort. Whether you're a seasoned gardener or a first-time mower, these models are designed to meet your needs effectively.
Top Page Image Contents