MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TIRES

Maintain proper air pressure in all tires (See “PRODUCT SPECIFICATIONS” section of this manual).

Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 12)

Raise mower to highest position to allow access to blades.

Remove blade bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

Reassemble blade bolt, lock washer and flat washer in exact order as shown.

Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS HEATTREATED.IF BOLT NEEDS REPLACING, REPLACE ONLY WITH APPROVE BOLT SHOWN IN THE REPAIR PARTS.

TRAILING

 

MANDREL

EDGE UP BLADE

 

ASSEMBLY

CENTER

01

14

2

HOLE

 

 

FLAT WASHER

 

 

LOCK WASHER

 

 

 

STAR

BLADE BOLT

FIG. 12

TO SHARPEN BLADE (See Fig. 13)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

01202

BLADE

5/8" BOLT OR PIN

FIG. 13

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour.

NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

Disconnect BLACK battery cable first then RED bat- tery cable and remove battery from tractor.

16

Page 16
Image 16
McCulloch MC17542STA manual Tractor

MC17542STA, MC17542ST specifications

The McCulloch MC17542ST and MC17542STA lawn mowers are distinguished machines designed for homeowners seeking a reliable and efficient solution for lawn maintenance. These models combine powerful performance with user-friendly features, making them an excellent choice for small to medium-sized lawns.

One of the key features of the MC17542ST and its counterpart, the MC17542STA, is their robust 420cc engine, which provides ample power to tackle various types of grass and terrain. The engine is equipped with advanced technology that ensures reliable starting and efficient fuel consumption, contributing to reduced emissions and lower operational costs. This powerful engine allows users to maintain productivity without the frequent interruptions associated with refueling.

Both models are equipped with a 42-inch cutting deck, which enables wider cutting swath and enhances mowing efficiency. The cutting deck is made of durable materials, ensuring longevity and resistance to wear. Furthermore, the deck height can be easily adjusted, allowing users to achieve their desired grass height with a simple lever adjustment. This feature is particularly beneficial for maintaining a healthy lawn, catering to different grass types and seasonal growth patterns.

The MC17542ST and MC17542STA mowers also feature a comfortable and ergonomic design. The adjustable seat ensures that operators can find their ideal driving position, enhancing comfort during extended mowing sessions. The user-friendly controls are positioned intuitively for easy access, allowing for seamless operation even for those who are new to lawn care.

Another notable characteristic of these models is their zero-turn capability, making it easier to maneuver around obstacles such as trees, flower beds, and garden ornaments. This feature significantly reduces the time spent mowing, as operators can turn with precision and navigate tight spaces effortlessly.

Safety is paramount with the McCulloch MC17542ST and MC17542STA models. They come equipped with safety features such as blade brake systems that stop the blades almost instantly when the operator releases the control. This ensures peace of mind during operation and enhances overall user safety.

In conclusion, the McCulloch MC17542ST and MC17542STA mowers offer an impressive blend of power, efficiency, comfort, and safety. With their powerful engines, wide cutting deck, user-friendly design, and zero-turn capability, they stand out as excellent choices for anyone looking to maintain a beautiful lawn with minimal effort. Whether you're a seasoned gardener or a first-time mower, these models are designed to meet your needs effectively.