To Adjust Gauge Wheels See Fig, To Transport

OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 8)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a ﬂat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

GAUGE

WHEEL

MOUNTING

BRACKET

3/8-16

LOCKNUT

	3/8 WASHER	SHOULDER
	3/8 WASHER	BOLT
		BOLT
		GAUGE WHEEL

FIG. 8

TO OPERATE MOWER (See Fig. 9)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deﬂector shield in place.

"ENGAGED" POSITION

ATTACHMENT

LIFT LEVER

HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DEFLECTOR

SHIELD

FIG. 9

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release parking brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than ﬁve (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with speciﬁcations of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

MC17542STA, MC17542ST specifications

The McCulloch MC17542ST and MC17542STA lawn mowers are distinguished machines designed for homeowners seeking a reliable and efficient solution for lawn maintenance. These models combine powerful performance with user-friendly features, making them an excellent choice for small to medium-sized lawns.

One of the key features of the MC17542ST and its counterpart, the MC17542STA, is their robust 420cc engine, which provides ample power to tackle various types of grass and terrain. The engine is equipped with advanced technology that ensures reliable starting and efficient fuel consumption, contributing to reduced emissions and lower operational costs. This powerful engine allows users to maintain productivity without the frequent interruptions associated with refueling.

Both models are equipped with a 42-inch cutting deck, which enables wider cutting swath and enhances mowing efficiency. The cutting deck is made of durable materials, ensuring longevity and resistance to wear. Furthermore, the deck height can be easily adjusted, allowing users to achieve their desired grass height with a simple lever adjustment. This feature is particularly beneficial for maintaining a healthy lawn, catering to different grass types and seasonal growth patterns.

The MC17542ST and MC17542STA mowers also feature a comfortable and ergonomic design. The adjustable seat ensures that operators can find their ideal driving position, enhancing comfort during extended mowing sessions. The user-friendly controls are positioned intuitively for easy access, allowing for seamless operation even for those who are new to lawn care.

Another notable characteristic of these models is their zero-turn capability, making it easier to maneuver around obstacles such as trees, flower beds, and garden ornaments. This feature significantly reduces the time spent mowing, as operators can turn with precision and navigate tight spaces effortlessly.

Safety is paramount with the McCulloch MC17542ST and MC17542STA models. They come equipped with safety features such as blade brake systems that stop the blades almost instantly when the operator releases the control. This ensures peace of mind during operation and enhances overall user safety.

In conclusion, the McCulloch MC17542ST and MC17542STA mowers offer an impressive blend of power, efficiency, comfort, and safety. With their powerful engines, wide cutting deck, user-friendly design, and zero-turn capability, they stand out as excellent choices for anyone looking to maintain a beautiful lawn with minimal effort. Whether you're a seasoned gardener or a first-time mower, these models are designed to meet your needs effectively.

McCulloch MC17542STA manual To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Transport

Models: MC17542STA MC17542ST