AT&T DS1/DMi/ISDN-PRI manual Procedure 262 Word 1 Isdn Board Parameters, Fields, PRI Parameters

7-16ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85

Procedure 262 Word 1: ISDN Board Parameters

Procedure 262 is used in System 85 R2V4 and Generic 2 to administer DMI-MOS (ANN35) for other service/facility options (DMI-MOS/ISDN-PRI only). Figure 7-5, Procedure 262 Word 1: ISDN Board Parameters, depicts procedure 262, word 1.

ENHANCED MODE - PROCEDURE: 262, WORD: 1

ISDN BOARD PARAMETERS

EQUIPMENT LOCATION

1.Module:

2.Cabinet:

3.Carrier:

4.Slot:

PRI PARAMETERS

5.Interface Type:

6.Facility Test Code:

7.Terminal Endpoint Identifier:

PRI LAYER 2 PARAMETERS

8.Timer T203:

9.Timer T200:

10. Counter N200:

11.Counter K:

Connected to CC0 ON-LINE

enter command:

	Figure 7-5.Procedure 262 Word 1: ISDN Board Parameters
Fields 1-4	V4 Only
	Assigns the circuit pack to an equipment location. These include the module
	number (0 through 30), cabinet number (0 through 7), DS1/MFAT carrier number
	(0 through 3), and slot number (5 or 18).
	NOTE: Entries for these four fields are the default values from translating a 5
	in field 14 of procedure 260. These entries should always be correct.