ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85

7-39

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENHANCED MODE - PROCEDURE: 012, WORD: 1

 

 

 

 

 

 

 

 

NAME DATABASE - NAME TO BE DISPLAYED

 

 

1 . Extension, VDN, or Trunk Group:

 

2 .

Type:

 

Display Start:

 

3 .

 

 

 

 

 

4 . Outgoing Trunk Display:

5 .

Copy Mode:

6 . Extension, VDN, or Trunk Group to Copy or Share:

DISPLAY ONLY

7.

Characters In Name

8.Shared Primary Extensions or Trunk Groups

9.Associated Extension Name Assigned

Connected to CC0 ON-LINE

enter command:

Figure 7-16.Procedure 012 Word 1: Name Database Establish Key (System 85 R2V4)

Field 1

Assigns either an extension number, vector directory number, or trunk group. Field

 

encodes and their descriptions are:

 

000 through 99999, for extension and directory numbers

 

NOTE: Whether the number is three, four, or five digits depends on the

 

numbering plan.

 

18 through 999, for trunk group numbers

Field 2

Assigns whether the encode for field 1 is a trunk group or extension/vector directory

 

number. Field encodes and their descriptions are:

 

0 For trunk groups

 

1 For extension numbers and vector directory numbers

Field 3

This field is only applicable for the identified extension’s display module. It controls

 

the number of blank spaces that are inserted before the first displayed character of

 

the name, dialed number, or trunk group name. Permitted encodes are numbers 1

 

through 30.

Page 175
Image 175
AT&T DS1/DMi/ISDN-PRI manual Through 99999, for extension and directory numbers