AT&T DS1/DMi/ISDN-PRI manual Procedure 309 Word 1 ARS Route Tables

7-100ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2

Procedure 309 Word 1: ARS Route Tables

This procedure is used for translating/controlling the Automatic Route Selection feature. Figure 7- 49, Procedure 309 Word 1: ARS Route Tables, depicts this procedure.

ENHANCED MODE - PROCEDURE: 309, WORD: 1

ARS - ROUTE TABLES

1.	ARS Plan:
2.	Pattern Number:

3.Preference Number:

4. Trunk Group:

5.Facility Restriction Level:

6. Warning Tone:

7.Distant Area Code (NPA):

8.	Send 1 For Toll:
9.	Toll Table Index:

10.Number of Digits Deleted:

11.Digit Collect (DC) Signal Ignore:

12.ICX ISDN Network Identifier:

Connectd to CC0 On-LINE

enter command:

Figure 7-49.Procedure 309 Word 1: ARS Route Tables (Generic 2)

Fields 1-11The ISDN-PRI does not place any new or additional considerations on translating these fields. The codes/digits translated are generally dependent on each ARS plan and other switch and network considerations. Field 11 is not applicable to ISDN.