AT&T DS1/DMi/ISDN-PRI manual Administration Options and Requirements Generic

ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2 7-51

GENERIC 2

Depending on whether the switch provides private network ISDN service or public network ISDN services, whether the switch functions as an endpoint or as a tandem node, will determine whether other features should be administered before ISDN-PRI. Primarily, these other features include tandem tie trunk access, trunk-to-trunk calling, and miscellaneous trunk restrictions. When applicable, these features are administered with procedures 275, word 1, 110, 111, 102, and 010, word 3.

Procedure 275 Word 4: ISDN Service — Enable/Disable

Screen-based procedure 275 is used to translate the system COS assignments as well as several other miscellaneous services and features. Word 4 provides the capability for enabling and disabling the ISDN service. Figure 7-25, Procedure 275 Word 4: System COS and Miscellaneous Service Assignments (Generic 2), depicts this procedure.

ENHANCED MODE - PROCEDURE: 275, WORD: 4

SYSTEM COS - MISCELLANEOUS

1.Traditional Code Calling Access Digits:

3.Trunk-to-Trunk Transfer:

ATTENDANT RELEASE LOOP OPERATION

4.Status:

5.Timed Recall Timer:

14.ISDN Status:

6 . Default Recent Disconnect Interval:
MAXIMUM	PREEMPTION LEVEL	ADMINISTRABLE ALARMS
7. All Incoming:		15. Even Port Peripherals:
OUTGOING		16.	Trunk	Software:
8.	Terminal:	17.	Auxiliary	Software:
9. Attendant:		DISPLAY	ONLY
		18. Local Switch		Number:

10.AUTOVON Interface Switch:

11.ACD Abandon Call Search:

12.MLL Status:

13.CMS Status:

Connected to CC0 ON-LINE

enter command:

Figure 7-25.Procedure 275 Word 4: System COS and Miscellaneous Service Assignments (Generic 2)