AT&T DS1/DMi/ISDN-PRI manual Synchronization Plan, DS1 Circuit Packs

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75 7-111

		SYNCHRONIZATION		PLAN		Page 1 of 1
	SYNCHRONIZATION SOURCE (DS1 circuit pack location)
	Primary: _ _ _		Secondary: ___
		DS1	CIRCUIT	PACKS
Location Name		S l i p	Location N a m e			Slip
_ _ _	_______________	_	_ _ _		_______________	_
_ _ _	_______________	_	_ _ _		_______________	_
_ _ _	_______________	_	_ _ _		_______________	_
_ _ _	_______________	_	_ _ _		_______________	_

Figure 7-56.Synchronization Plan Screen

Primary The 3-character location of the circuit pack that is the primary synchronization reference.

NOTE: The primary will be one of those DS1 circuit packs that has previously been administered with slip detection y. The Location, Name, and Slip (actually slip detection) fields list the DS1 circuit packs administered on the DS1 CIRCUIT PACK screen. The primary and secondary source must be selected from this list.

Secondary The 3-character location of the circuit pack that is the secondary synchronization reference.

There is no requirement that a secondary source be provided. However, it is a good practice.

The Command Line Feature set provides four executable commands for controlling and monitoring synchronization. They are:

●Disable

●Enable

●Status

●Set