AT&T DS1/DMi/ISDN-PRI manual Procedure, TTL Telephone Digits

ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85 7-49

ENHANCED MODE - PROCEDURE: 107, WORD: 1

ATMS - TERMINATING TEST LINE ASSIGNMENT

1.Trunk Group:

2.Test Line Type:

TTL TELEPHONE		DIGITS
3.	Digit	1:	11.	Digit	9:
4.	Digit	2:	12.	Digit	10:
5.	Digit	3:	13.	Digit	11:
6.	Digit	4:	14.	Digit	12:
7.	Digit	5:	15.	Digit	13:
8.	Digit	6:	16. Digit		14:
9.	Digit	7:	17.	Digit	15:
10.	Digit	8:	18.	Digit	16:
DISPLAY	ONLY
19. Trunk Type:
Connected to CC0 ON-LINE
enter command:

Figure 7-23. Procedure 107		Word 1: ATMS Termination Test Line Assignment (System 85 R2V4)
Field 1	Identifies those ISDN-PRI trunk groups accessed by the trunk verification features.
	Permitted encodes are previously defined trunk group numbers from 18 to 999.
Field 2	Dash (-),	is appropriate for voice terminal and attendant console applications. If a
	transmission test line is used, its type should be specified.
Fields 3-18	Assigns digits for the terminating test line. Procedure 107, words 2-7, need only be
	translated whenever ATMS is used.

Procedure 108 Word 1: ISDN Trunk Group Terminating Test Line Number (Digits)

This procedure is used for ISDN-PRI testing purposes with procedure 648 test 3. This procedure translates the line number that identifies the loop around termination for the particular B-channel. This test line number must be assigned for both private and public network configurations. Whether more than one terminating test line number is needed depends on the number of ISDN-PRI links and whether they terminate on more than one switch. Figure 7-24,Procedure 108 Word 1: ISDN Terminating Test Line Assignments (System 85 R2V4), depicts this procedure.