7-34ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85

ENHANCED MODE - PROCEDURE: 103, WORD: 1

NETWORK TRUNK GROUP TRANSLATION

1.Trunk Group:

2.Facility Restriction Level:

3.Network Trunk:

4.Main/Tandem:

5.Incoming Tie to AAR/ARS or APLT:

6.Authorization Code Required:

7.Bridge-On Allowed:

8.Trunk Reservation Limit:

9.AAR/ARS Prefix:

10.Data Protection (Permanent):

11.Remote Access Echo Suppressor:

12.AAR Conditional Routing:

13.Second TCM:

14.Digit Collection:

15. Bearer Capability:

Connected to CC0 ON-LINE

enter command:

Figure 7-14.Procedure 103 Word 1: Network Trunk Group Translations (System 85 R2V4)

Field 1

Displays the trunk group number previously administered in procedures 100 and

 

101.

Fields 2-13

DS1 or ISDN-PRI do not place any new or additional considerations on translating

 

these fields. The encodes that are translated are generally dependent on each trunk

 

group, its application, and the associated trunk groups. Refer to Appendix C,

 

Administrative Procedure Summary, for more information about the dynamic 120

 

trunk types. For more information see Dynamic Trunk Type in Procedure 100 Word

 

1.

Field 14

Specifies how the dialed digits are outpulsed. Field encodes and their descriptions

 

are:

0When digit outpulsing may overlap digit reception

1When all digits must be received before outpulsing may start. All ISDN applications, regardless of the trunk type, require that a (1) be translated in this field. Digit outpulsing does not begin until all digits are received. Then digits are outpulsed as ASCII characters — per the ISDN recommendations.

Page 170
Image 170
AT&T DS1/DMi/ISDN-PRI manual Fields, 34ADMINISTRATION Options and Requirements System