AT&T DS1/DMi/ISDN-PRI manual Aar/Ars

ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2 7-91

ENHANCED MODE - PROCEDURE: 103, WORD: 1

NETWORK TRUNK GROUP TRANSLATION

1.		Trunk	Group:
2.	Facility	Restriction	Level:
3 .		Network	Trunk:
4 .		Main/Tandem:
5 .	Incoming Tie to AAR/ARS or APLT:
6 .	Authorization Code Required:
7 .		Bridge-On	Allowed:
8 .	Trunk	Reservation	Limit:
9 .		AAR/ARS	Prefix:

10.Data Protection (Permanent):

11.Remote Access Echo Suppressor:

12.AAR Conditional Routing:

13. Second TCM:

14.Digit Collection:

Connected to CC0 ON-LINE

enter command:

Figure 7-43.Procedure 103 Word 1: Network Trunk Group Translations (Generic 2)

Field 1Displays the trunk group number, such as previously administered in procedure 100 and 101.

Fields 2-13The ISDN-PRI does not place any new or additional considerations on translating these fields. The encodes that are translated are generally dependent on each trunk group, its application, and the associated trunk groups.

Field 14 Specifies how the dialed digits are outpulsed. Field encodes and their descriptions are:

0Digit outpulsing may overlap digit reception.

1All digits must be received before outpulsing may start All ISDN applications, regardless of the trunk type, require that a (1) be translated in this field. Digit outpulsing does not begin until all digits are received. Then digits are outpulsed as ASCII characters — per the ISDN recommendations.