AT&T DS1/DMi/ISDN-PRI manual Enhanced Mode Procedure 210, Word, Ldn, Npa-Nxx

	ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2	7-75
Field 3	Assigns the extension partition identification for the tenant services feature. This
	number associates the single or block of extension numbers to a particular ISDN
	facility (NPA-NXX Designator).
Field 4	Associates an NPA-NXX Designator with the previously defined extension.

Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments

This procedure is used to configure the attendant consoles into functional groups known as attendant partitions. Also, LDN and NPA-NXX assignments are completed, thus relating these assignments to a particular attendant console or attendant partition. Figure 7-35, Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments, depicts this procedure.

				ENHANCED MODE - PROCEDURE: 210, WORD: 2
				CONSOLE ASSIGNMENTS - ATTENDANT PARTITIONS
1.			Console Number:
2.		Attendant		Partition:
3.				Control:
4.				LDN:
5.			NPA-NXX	Designator:
	Connected to CC0 ON-LINE
enter			command:

Figure 7-35.Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments

Field 1	Translates a console number. Permitted encodes are any 2-digit number within the
	range of 1 through 40.
	NOTE: This console must be previously assigned in procedure 210, word 1.
Field 2	Assigns the attendant partition number. Permitted encodes are any unused number
	within the range of 0-40.