AT&T DS1/DMi/ISDN-PRI manual 20ADMINISTRATION Options and Requirements System, Display only

7-20ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85

Field 4 of procedure 000, word 4, need not be translated when the switch does not transmit SID or connected number to the network (public or private).

If the switch contains more than one office code, multiple NPA/NNX designators may be needed.

Figure 7-7,Procedure 000 Word 4: NPA–NXX Partition Assignment (System 85 R2V4), depicts procedure 000, word 4.

ENHANCED MODE - PROCEDURE: 000, WORD: 4

EXTENSION NPA-NXX/PARTITION ASSIGNMENT

1.First Extension:

2.Last Extension:

3.Extension Partition:

4.NPA-NXX Designator:

DISPLAY ONLY

5. Invalid Extension:

Connected to CC0 ON-LINE

enter command:

Figure 7-7.Procedure 000 Word 4: NPA – NXX/Partition Assignment (System 85 R2V4)

Field 1	Assigns a single extension number or the first extension number for a block of
	numbers. The single number or block of numbers will be unique in terms that they
	relate to a single extension partition identification.
Field 2	Assigns the last extension number for a block of numbers.
Field 3	Assigns the extension partition identification for the tenant services feature.
Field 4	Associates an NPA-NXX Designator with a range of extensions.

Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments

This procedure is used to configure the attendant consoles into functional groups known as attendant partitions. Also, listed directory number (LDN) and NPA-NXX assignments are completed, thus relating these assignments to a particular attendant console or attendant partition. Figure 7-8,Procedure 210 Word 2: Attendant Partition Assignments (System 85 R2V4), depicts procedure 210, word 2.