ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2

7-71

 

 

 

 

Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping

This procedure is used to translate Codeset Mapping parameters. Figure 7-32, Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2), depicts this procedure.

ENHANCED MODE - PROCEDURE: 280, WORD: 1

ISDN CODESET MAPPING

1.Codeset Map Number:

2.Incoming/Outgoing:

MAPPED FROM CODESET/INFORMATION ELEMENT

3.Codeset:

4 . IE Opcode:

MAPPED TO CODESET/INFORMATION ELEMENT

5.Codeset:

6 . IE Opcode:

DISPLAY ONLY

7. Available Map Number Mappings:

Connected to CC0 ON-LINE

enter command:

Figure 7-32.Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2)

Field 1

Assigns a codset map number (such as defined in procedure 262, word 3). Field

 

encodes and their descriptions are:

Dash (–),which disables codeset mapping.

Any number between 0 and 15 that is previously defined with procedure 262, word 3.

Field 2

Specifies whether codeset mapping is for incoming messages or outgoing messages.

 

Field encodes and their descriptions are:

0Assigns mapping for incoming messages.

1Assigns mapping for outgoing messages.

From a Generic 2 perspective, incoming means mapped from Codeset 6 to Codeset 7. While outgoing means Codeset 6 is mapped to Codeset 7. Two-way trunk groups will normally have a Codeset Map translated for both incoming and outgoing.

Page 207
Image 207
AT&T DS1/DMi/ISDN-PRI Enhanced Mode Procedure 280, Word Isdn Codeset Mapping, Mapped from CODESET/INFORMATION Element