AT&T DS1/DMi/ISDN-PRI manual Bcc, Avd or data, In/out, Toll

7-122ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1

BCC	This field is only displayed when ISDN-PRI is enabled on the SYSTEM			PARAMETERS
	CUSTOMER-OPTIONS		screen and when the Communications Type field is	administered
	avd or data.
Trunk Type	Establishes the physical type of incoming and outgoing trunks. For tie trunk
(in/out)	applications, field		encodes and their descriptions are:
	●	Auto
	●	Immed-start
	●	Wink-start
	●	Delay-dial

With System 75, the digital loss plan is administered by entering a code with the Group Name field. With Generic 1, the digital loss plan is administered with the following three fields.

Connect to The default is n. Enter y if the trunk group terminates on a Digital Toll Office.

Toll

STT Loss This field is only displayed condition that the Connected to Toll field is translated n. Allowable entries are the default normal or option low. Refer to chapter 4, The Digital Loss Plan, for a description of the digital loss plan and for application information.

DTT toAllowable entries are the default normal or option low. Refer to chapter 4, The

DCO Loss Digital Loss Plan, for a description of the digital loss plan and for application information.

Figures 7-64,Trunk Group Screen, Page 2 (Tie), an 7-65,Trunk Group Screen, Page 3 (Tie), depict this procedure.