Nortel Networks 4050 manual Anonymous, Admin@hostname.isd

590Chapter 11 Managing certificates

Table 122 Certificate and key import information

Parameter	Description
[FTP user name and password]	For FTP, SCP, and SFTP, the user name and password
	to access the file exchange server. The default is
	anonymous.
	For anonymous mode, the Nortel SNAS 4050 uses the
	following string as the password (for logging purposes):
	admin@<hostname>.isd.
[Pass phrase]	If the key is password protected, the password phrase
	specified when the key was created or exported.

4If the private key was not included in the certificate file, repeat step 3 on page 589 to import the key file, then go to step 5.

5Apply the changes.

The certificate and private key are now fully installed.

Figure 169 shows sample output for the /cfg/cert #/import command. For more information about the Certificate menu commands, see “Managing and viewing certificates and keys using the CLI” on page 577.

Figure 169 Adding a certificate and private key by importing

>> Certificate 3# import

Select protocol (tftp/ftp/scp/sftp) [tftp]: ftp

Enter host name or IP address of server: ftp.example.com

Enter filename on server: VIP_1.crt Retrieving VIP_1.crt from 192.168.128.58 FTP User (anonymous): Password:admin@hostname/IP.isd received 2392 bytes

Enter pass phrase: Key added. Certificate added.

Use 'apply' to activate changes.

>>Certificate 3# apply Changes applied successfully.

320818-A