Nortel Networks 4050 Creating a domain using the CLI, Manually creating a domain using the CLI

	Chapter 4 Configuring the domain 121
Command	Parameter
	redir onoff
/cfg/domain #/adv	interface <interface ID>
	log
/cfg/domain #/aaa/radacct	ena
	dis
/cfg/domain #/aaa/radacct/servers	list
	del <index number>
	add <IPaddr> <port> <shared
	secret>
	insert <index number> <IPaddr>
	move <index number> <new index
	number>
/cfg/domain #/aaa/radacct/vpnattribu	vendorid
	vendortype

Creating a domain using the CLI

You can create a domain in two ways:

•“Manually creating a domain using the CLI” on page 121

•“Using the Nortel SNAS 4050 domain quick setup wizard in the CLI” on page 123

Manually creating a domain using the CLI

To create and configure a domain manually, use the following command:

/cfg/domain <domain ID>

where domain ID is an integer in the range 1 to 256 that uniquely identifies the domain in the Nortel SNAS 4050 cluster.

Nortel Secure Network Access Switch 4050 User Guide