Nortel Networks 4050 manual Adding a static route, Add Route fields

518Chapter 10 Configuring system settings

From the selected static route screen, complete the following tasks as necessary:

•“Adding a static route” on page 518

•“Removing a static route” on page 519

Adding a static route

To add a static routes, perform the following steps:

1Select the static route from the table.

2Click Add.

The Add Route dialog box appears (see Figure 139).

Figure 139 Add Route

3Enter the static route information in the applicable fields. Table 101 describes the Add Route fields.

Table 101 Add Route fields

Field	Description
Destination Address	Specifies the static route destination IP address.
Netmask	Specifies the network mask to apply to the IP address.
Gateway	Specifies the IP address on the core router.

Note: When you add a static route to the system, host, or interface configuration, the route is automatically assigned an index number. There are separate sequences of index numbers for routes configured for the cluster, for each host, and for each interface.

320818-A