Nortel Networks 4050 manual Completing initial setup, Enable SRS administration

	Chapter 17 Configuration example 797
Enter a password for the "admin" user:
Re-enter to	confirm:
Run NSNAS quick setup wizard [yes]:
Creating	default networks under /cfg/domain 1/aaa/
network
Enter NSNAS	Portal Virtual IP address(pvip): 10.40.40.100
Enter NSNAS	Domain name: Domain1
Enter comma	separated DNS search list
(eg company.com,intranet.company.com):
Create http	to https redirect server [no]:

Use restricted (teardown/restricted) action for TunnelGuard failure? [yes]:

Create default tunnel guard user [no]: yes

Using 'restricted' action for TunnelGuard failure. User name: tg

User password: tg

Creating client filter 'tg_passed'. Creating client filter 'tg_failed'. Creating linkset 'tg_passed'.

Creating linkset 'tg_failed'.

Creating group 'tunnelguard' with secure access. Creating extended profile, full access when tg_passed

Enter green vlan id [110]: 130

Creating extended profile, remediation access when tg_failed

Enter yellow vlan id [120]:

Creating user 'tg' in group 'tunnelguard'. Initializing system......ok

Setup successful. Relogin to configure.

Completing initial setup

Enable SSH for secure management communications (required for SREM):

>>Main# cfg/sys/adm/ssh on

Enable SRS administration:

>>Main# cfg/sys/adm/srsadmin/ena

Nortel Secure Network Access Switch 4050 User Guide