Nortel Networks 4050 manual Domain vlan or Switch vlan menu displays, Add name Vlan ID

Chapter 3 Managing the network access devices 83

The Nortel SNAS 4050 maintains separate maps for the domain and the switch. If you add a VLAN from the domain-level vlan command, you must use the domain-level command for all future management of that mapping. Similarly, if you add a VLAN from the switch-level vlan command, you must use the switch-level command for all future management of that mapping.

The Domain vlan or Switch vlan menu displays.

The Domain vlan or Switch vlan menu includes the following options:

/cfg/domain #[/switch #]/vlan followed by:

add <name> <VLAN ID>	Adds the specified VLAN to the domain or switch VLAN
	map. You are prompted to enter the required
	parameters if you do not include them in the command.
	• name is the name of the VLAN, as configured on
	the switch
	• VLAN ID is the ID of the VLAN, as configured on
	the switch
	The system automatically assigns an index number to
	the VLAN entry when you add it. If you are executing
	the command from the Domain vlan menu, the index
	number indicates the position of the new entry in the
	domain map. If you are executing the command from
	the Switch vlan menu, the index number indicates the
	position of the new entry in the switch map.
	Repeat this command for each Green and Yellow VLAN
	configured on the network access devices.
del <index>	Removes the specified VLAN entry from the applicable
	VLAN map.
	• index is an integer indicating the index number
	automatically assigned to the VLAN mapping when
	you created it
	The index numbers of the remaining entries adjust
	accordingly.
	To view the index numbers for all VLAN entries in the
	map, use the
	/cfg/domain #[/switch #]/vlan/list
	command.
list	Displays the index number, name, and VLAN ID for all
	VLAN entries in the map.

Nortel Secure Network Access Switch 4050 User Guide