Nortel Networks 4050 manual Configuring Snmp notification targets using the CLI

626Chapter 12 Configuring SNMP

/cfg/sys/adm/snmp/users <user ID> followed by:

authpasswd <password> Specifies the password for USM user authentication. The password is required if the security level is set to auth or priv.

•password is a string that must be at least eight characters long.

privproto desaes	Specifies the protocol used for encryption. Valid options
	are:
	•	des
	•	aes
	The default is des.
privpasswd <password>	Specifies the USM user’s individual encryption key. The
	password is required if the security level is set to priv.
	• password is a string that must be at least eight
		characters long.
del	Removes the USM user from the configuration.

Configuring SNMP notification targets using the CLI

SNMP managers function as the notification targets for SNMP monitoring. To configure notification targets, use the following command:

/cfg/sys/adm/snmp/target <target ID>

where target ID is a positive integer that uniquely identifies the notification target in the cluster.

The Notification Target menu displays.

320818-A