Nortel Networks 4050 manual Naming the new Dhcp scope 320818-A

784Chapter 17 Configuration example

4Enter a descriptive name to identify the new scope (see Figure 238).

In this example, you are creating a DHCP scope for the Red VLAN on the Ethernet Routing Switch 8300. The scope start address for the VLAN is 10.110.110.5 and the end address is 10.110.110.25. The scope you create must have a range of IP addresses that is large enough to accommodate all endpoint devices in your network.

Figure 238 Naming the new DHCP scope

320818-A