Nortel Networks 4050 Configuring extended profiles using the CLI, Main# /cfg/domain 1/AAA/filter

<filter ID>

Chapter 5 Configuring groups and profiles 203

Figure 39 shows sample output for the /cfg/domain 1/aaa/filter command and commands on the Client Filter menu.

Figure 39 Client Filter menu commands

>>Main# /cfg/domain 1/AAA/filter 3

Creating Client Filter 3 Filter name: branch_pass

----------------------------------------------------------

[Client Filter 3 Menu]

name	- Set filter name
tg	- TunnelGuard checks passed
comment	-Set comment
del	- Remove client filter

>>Client Filter 3# tg Current value: ignore

TunnelGuard passed (true/false/ignore): true

>>Client Filter 3#

Configuring extended profiles using the CLI

To create and configure an extended profile, use the following command:

/cfg/domain 1/aaa/group <group IDgroup name>/extend

[<profile ID>]

where profile ID is an integer in the range 1 to 63 that uniquely identifies the profile in the group. If you do not enter the profile ID as part of the command, you are prompted to do so.

When you first create the extended profile, you must enter the profile ID. After you have created the extended profile, you can use either the profile ID or the name of the associated client filter to access the extended profile for configuration.

Nortel Secure Network Access Switch 4050 User Guide