Nortel Networks 4050 manual Configuring authentication using the Srem

Chapter 6 Configuring authentication 269

Configuring authentication using the SREM

The basic steps for configuring and managing authentication are:

1Create the authentication methods.

2Configure specific settings for the methods.

3Specify the order in which the authentication methods will be applied. Perform this step even if you define only one method on the Nortel SNAS 4050.

4Commit the configuration changes.

To configure authentication on the Nortel SNAS 4050 using the SREM, refer to the following tasks:

•“Configuring authentication methods using the SREM” on page 270

•“Configuring RADIUS authentication using the SREM” on page 271

•“Configuring LDAP authentication using the SREM” on page 282

•“Configuring local database authentication using the SREM” on page 298

•“Specifying authentication fallback order using the SREM” on page 314

•“Saving authentication settings” on page 316

Nortel Secure Network Access Switch 4050 User Guide