Nortel Networks 4050 manual Traffic Log Syslog Settings fields

180Chapter 4 Configuring the domain

2Enter the traffic log information in the applicable fields. Table 26 describes the Traffic Log Syslog Settings fields.

Table 26 Traffic Log Syslog Settings fields

Field	Description
IP Address	Specifies the IP address of the syslog server.
UDP Port	Specifies the UDP port number of the syslog server.
	Accepts an integer in the range 1–65534 that indicates the
	UDP port number. The default is 514.
Priority	Specifies the priority level of the syslog messages that are
	sent. The options are:
	• debug — information useful for debugging purposes
	only
	• info — informational messages
	• notice — information about conditions that are not error
	conditions but nevertheless warrant special attention
	The default value is info.
Facility	Specifies the facility parameter of syslog messages.
	The facility parameter specifies the type of program logging
	the message. The configuration file can then specify
	different handling for messages from different facilities.
	The default value is local4.
Enabled	Enables or disables traffic logging with syslog messages to
	the specified syslog server.
	Traffic logging with syslog messages is disabled by default.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A