Nortel Networks 4050 manual Reordering Ldap macros, Removing Ldap macros

Chapter 6 Configuring authentication 297

4Click Apply.

The new LDAP macro is automatically assigned a unique index number, and appears in the LDAP Macro Table.

5Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

Reordering LDAP macros

To change the order of existing LDAP macro variables, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > ldap > LDAP Macros tab.

The LDAP Macros screen appears (see Figure 71 on page 295).

2Select an LDAP macro entry from the LDAP Macro Table.

3Use the up and down arrows to reposition the selected entry.

4Click Apply on the toolbar to accept the new order, and adjust index numbers for the LDAP macros accordingly. Click Commit on the toolbar to save the changes permanently.

Removing LDAP macros

To remove existing LDAP macro variables, perform the following steps:

1Select the Secure Access Domain > domain > AAA > Authentication > ldap > LDAP Macros tab.

The LDAP Macros screen appears (see Figure 71 on page 295).

2Select an LDAP macro entry from the LDAP Macro Table.

3Click Delete.

A confirmation dialog appears.

4Click Yes.

The LDAP macro is removed from the LDAP Macro Table.

Nortel Secure Network Access Switch 4050 User Guide